Search results

The purpose of this paper is to introduce a high-speed rolling bearing test rig supported by sliding bearing and its first experimental results.

Through analyzing the disadvantages of using rolling bearing as supporting bearing, the bottlenecks that need to be resolved urgently in the development of rolling bearing experimental technology, and the advantages of the sliding bearing, this study used the sliding bearing as the supporting bearing for the high-speed rolling bearing test rig for the purpose of prolonging the service life, increasing the load capacity and promoting the operating stability.

The experimental results show that the high-speed rolling bearing test rig supported by sliding bearing could stably rotate at 70,800 rpm without installing the test bearing; the temperature of the sliding bearing is increasing with the rotating speed and the maximum is less than 95°C. Moreover, the new test rig, installing an angular contact ball bearing as test bearing, could also stably rotate at 54,000 rpm with 2 kN axial load and 1 kN radial load; the temperature of the sliding bearing is increasing with the rotating speed and the maximum temperature is less than 97°C.

Rolling test rig has been established.

This paper proposes a high-speed rolling bearing test rig supported by sliding bearing, which greatly prolongs the service life, increases the load capacity and promotes the operating stability, moreover, reduces the risk of supporting bearing failure before the test bearing. This paper can also provide a new idea and reference for the design of similar bearing test rig.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-03-2020-0085/

This paper aims to examine the effect of ownership structure and board gender diversity on charitable donations for a group of listed electronics companies in Taiwan.

Using linear regression analysis, this paper analyses the ownership structure, board gender diversity and charitable donations of 380 Taiwanese electronics companies (2011-2013).

While domestic institutional investors, such as domestic mutual funds and corporate investors, take more of agency logic view, it negatively impacts on charitable donations. However, the empirical findings of this paper indicate that board gender diversity with the critical number of female directors was positively related to charitable donation. Thus, it is clear that female directors reaching critical numbers were taking more of a stakeholder view of institutional logic, emphasizing the balance of interests of internal and external stakeholders.

This paper is limited to selected Taiwanese electronics companies over a two-year time frame, and charitable donations are the only proxy of corporate social responsibility (CSR) activity. The paper suggests that, as predicted by stakeholder theory and critical mass theory, companies with boards composed of at least three female directors make higher charitable donations.

This paper indicates that female directors on the board should have more voices on the board regarding the necessity and importance of CSR.

The paper contributes to existing literature by looking into the effects of ownership structure and board gender diversity on charitable donations.

The purpose of this paper is to introduce the structure design process of the cantilever spindle with limited installation space and wishing to increase its critical speed.

In this paper, the finite element method was used to analyze the influence of the supporting stiffness and the structure of the spindle on the critical speed, and then the structure of the spindle was designed; moreover, the experiment was accomplished and the experiment results show that the spindle can work stably.

Through analyzing the influence of the supporting stiffness and the structure of the spindle on the critical speed, the following conclusions could be obtained: the shape of the first-mode is the bend vibration of the cantilever of the spindle; the first-order critical speed of the spindle gradually decreases with the diameter and length of the cantilever increasing; the first-order critical speed of the spindle increases with the depth and diameter of the blind hole increasing; and the experiment was accomplished and the experiment results show that the spindle can work stably.

In this paper, the finite element method was used to design the spindle of the testing machine, and satisfactory results were obtained. It can provide a theoretical reference for the design of a similar spindle.

This paper aims to select an appropriate contact force model and apply it to the interaction model between the balls and the cage in the rolling bearings to describe the elastic–plastic collision phenomena between the two.

Taking the ball–disk collision mode as an example, several main contact force models were compared and analyzed through simulation and experiment. In addition, based on the consideration of yield strength of materials and initial collision velocity, a variable recovery coefficient model was proposed, and its validity and accuracy were verified by the ball–disk collision experiments. Then, respectively, the Flores model and the Hertz model were applied to the interaction between the balls and the cage, and the dynamics simulation results were compared.

The results indicate that the Flores model has good regression of recovery coefficient, indicating good applicability for both elastic and elastic–plastic contacts and can be applied to the contact collision situations of various materials. Under certain working conditions, there are significant differences in the dynamics results of rolling bearings simulated using the Flores model and Hertz model, respectively.

This paper applies the Flores model with variable recovery coefficients to the dynamics simulation analysis of ball bearings to solve the elastic–plastic collision problem between the rolling elements and the cage that cannot be reasonably handled by the Hertz model.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-04-2024-0138/

The purpose of this study is to develop a normal contact stiffness (NCS) model among three disks of the assembled rotor system, which systematically considers the friction coefficient, the asperities interaction and the elastoplastic contact regime.

Based on the revised fractal theory, considering the friction effect, the elastoplastic contact regime and the asperities interaction in a simple way, the total NCS among three disks of the rod-fastening rotor bearing system is established. Effects of fractal dimension and roughness, friction coefficient, asperities interaction and material properties on the normal stiffness are investigated by simulations and the relevant comparisons are given for examining the reasonability of the proposed model.

NCS will decrease when asperities interaction and friction are included. As the load increases, the influences of asperities interaction and friction on stiffness become serious. NCS will be enhanced when the elastoplastic regime is considered.

A comprehensive NCS model is developed. It provides a theoretical basis for the modeling of the NCS for multi-interfaces.

The purpose of this study is to investigate the dynamic behavior of the ball bearing with cage broken.

By analyzing the complicated relationship and interactions among the ball bearing elements, the dynamic modelling of the ball bearing with broken cage was established, and the dynamic simulations were conducted by solving the ball bearing dynamic equations using varying-step Runge–Kutta integration.

The computational results show that there is considerable distinguishment in the dynamic characteristics between the normal cage and the broken cage of the bears. The broken cage makes the trajectory of the cage erratic, and the vibration amplitude is much bigger than that of the normal cage, which makes the motion of the cage unstable. When one of the cage lintels breaks up, the two adjacent balls will collide with each other; what is worse, this may make the balls crush because of the high amplitude of the collision force. The broken cage makes the cage-race interaction force much larger than that of the normal cage, which could promote the guiding ring and quicken the cage wear-failure.

This study can provide important ideas for the fault identification of the ball bearing with cage broken.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-01-2020-0042/

Small firms in China anticipate entrepreneurial opportunities for continual growth. However, they may fail to recognize opportunities because of their inefficiency in managing their knowledge.

In this explorative paper, the authors assess the opportunity recognition efficiency of 168 small Chinese firms using data envelopment analysis (DEA). Supplementary Tobit regressions were conducted for further exploring the factors that influence the firms’ efficiency in opportunity recognition.

Results from the DEA suggest that most respondents recognize significantly fewer opportunities than those with equivalent knowledge stock. Moreover, many firms have low levels of pure technical efficiency but high levels of scale efficiency, indicating insufficient use of knowledge as a major reason for inefficiency in opportunity recognition. The Tobit regressions show that sales and research and development intensity are relevant to a firm’s opportunity recognition efficiency.

This study calls for the investigation of efficiency issues in opportunity recognition and suggests that managers guard against unwarranted loss of opportunities owing to inefficient use of existing knowledge elements.

First, the authors introduce the concept of opportunity recognition efficiency within the entrepreneurial process. Second, they manifest the role of knowledge management in opportunity recognition. Third, they introduce DEA to investigate the relationship between knowledge stock and opportunity recognition. Fourth, this study reveals that inefficient use of knowledge is a disadvantage of small Chinese firms in terms of opportunity recognition.

The purpose of this study is to identify the dynamic parameters of journal bearings in asymmetric rotor systems without additional test runs or excitations.

An asymmetric rotor-bearing test rig was set up for the identification experiment. Comparations were made between the measured response of the asymmetric rotor and the symmetric rotor. The mathematical model of the asymmetric rotor is established by the finite element method. The identification algorithm is based on the model of the rotor and the measured vibration response to identify bearing parameters. The influence of modeling error and measurement noise on the identification results are numerically analyzed. The dynamic parameters of the journal bearings under different rotational speeds are identified and compared with the theoretical values calculated by the perturbation method.

The experiment results show that the vibration characteristics of the asymmetric rotor and the symmetric rotor are different. The numerical evaluation of the identification algorithm shows that the algorithm is accurate and has good robustness to modeling error and measurement noise. The identified dynamic parameters agree reasonably well with the parameters derived from the theoretical bearing model.

The proposed identification method uses the unique vibration characteristics of asymmetric rotors to identify the bearing dynamic parameters. As the method does not require excitations or additional test runs, it is suitable for the field test.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-03-2024-0096/

This study aims to investigate whether and how public air environmental concern (PAEC) affects corporate environmental, social and governance (ESG) performance in emerging markets.

This study measured PAEC using the Baidu index search keyword “雾霾 (PM2.5)” and assessed its impact on corporate ESG among Chinese A-share listed companies from 2011 to 2020 through regression analysis.

The empirical results indicate a positive relationship between PAEC and corporate ESG. Moreover, PAEC facilitates enhanced corporate ESG performance by mediating through corporate reputation and government environmental regulations. Heterogeneity analysis shows that the promotion effect of PAEC on ESG is more pronounced in the subgroups of companies with an excellent green image, low perceived uncertainty, strong management political connections, low short-termism, high industry technological levels and low pollution levels.

The practical implications of this study underscore the importance for policymakers, investors and companies to prioritize PAEC and its influence on corporate ESG performance.

This study contributes to ESG literature by highlighting the positive impact of external oversight, such as PAEC.

Asymmetric rotating machinery supported by oil film bearings is relatively common in practical applications. The purpose of this study is to propose a method for estimating the oil film parameters of the bearings in an asymmetric rotor-bearing system.

The proposed method requires the finite element model and translational displacement responses at the center of mass and bearings locations to form a regression equation to estimate the unknown parameters. Due to the transverse stiffness of the asymmetric rotor is not symmetrical, the analysis and parameter estimation procedures are performed in a rotating coordinate. Numerical simulations were carried out to illustrate the vibration characteristics of the asymmetric rotor system. The proposed method is applied to the simulated responses to estimate the assumed oil film parameters. The influence of the estimated parameter deviations on the rotor dynamic characteristics is discussed.

The vibration characteristics of asymmetric rotors are different from those of symmetrical rotors. The bearing parameters estimated by the proposed method are close to the assumed values, within a maximum error of 9%. The deviations of the estimated parameters have little effect on the vibration characteristic of the rotor system.

The proposed method does not require changing the rotational speed or applying additional excitation force to the rotor, which is suitable for the field test.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-04-2023-0111/